Sluice Non-Rising Stem Gate Valve

• Customization: Available
• Media: Water
• Temperature: Low Temperature
• Model NO.: FSV-016
• Type: Dual-through
• Material: Cast Iron
• Connection Form: Flange
• Pressure: Low Pressure
• Actuator: Manual
• Seal Surface: Wedge Gate Valve
• Thread Position of Valve Rod: Inside Gate Valve
• Usage: Regulation, Drain, Flow Control
• Standard: DIN
• Application: Industrial Usage, Water Industrial Usage, Household Usage
• Design Stanard: BS5163, DIN3352, AWWA, C509/515 or Custom Made
• Testing Standard: EN12266-2, DIN3230, ISO5208, AS2638.2
• Pressure Testing: Shell:PN*1.5, Seal:PN*1.1
• Operator: Cap Nut/Handwheel
• Body: Ductile Iron (GGG50)
• Bonnet: Ductile Iron (GGG50)
• Bolts: Carbon Steel/Stainless Steel
• Gland: Stainless Steel 304
• O Ring: NBR/EPDM
• Wedge: Ductile Iron (GGG50)
• Stem: Stainless Steel 304
• Pressure Rate: PN10/16
• Hand Wheel: Ductile Iron (GGG50)
• Thrust Washer: PTFE/Nylon
• Wedge Nut: Brass
• Transport Package: Wooden Case
• Specification: DN50-600
• Trademark: OEM
• Origin: Suzhou
• HS Code: 8481801090
• Production Capacity: 800 Sets Per Month

Product Description

Sluice Non-Rising Stem Gate Valve
 

Application Range
 

•Potable water

• Waste water

• Water treatment and distribution systems

• Food and chemical enterprises

• HVAC

• Power plants

 

Operation Versions

• Hand wheel

• Bare shaft

• Operation cap

• ISO top flange

• Gearbox and hand wheel

• Gearbox and top flange

• Electrical and Pneumatic

• Body & Cover are made of high grade Ductile Iron.

• Disc is designed with an abrasion resistant nylon guide which can help less opening or closing torque and smooth during operation.

• Forged stem provide stronger stem operation and less moving parts.

• Disc is covered by high-grade rubber which complies with drinking water.

• High-tech rubber curing with precise geometry dimensions, more resilient & strong adhesive to ductile casting.

• The 3 O-ring stem seals are designed to prevent stem leakage. and provide replacement of the O-ring without disassembling of valve from mainline pipes.

• Both inside & outside are coated with epoxy resin powder.

• Hydro-static test pressure for seat: PN x 1.1 , for shell: PN x 1.5 according to EN 12266-1.

Material

Item	Part	Material
1	Body	EN GJS 500-7
2	Bonnet	EN GJS 500-7
3	Bonnet Screw	C.S
4	Nuts	SS304
5	Bonnet	Ductile Iron(GGG50)
6	Wedge	DI+EPDM
7	Wedge Nut	Brass
8	Stem	AISI 420
9	Stem Nut	Brass
10	Seal Rings	NBR/EPDM
11	Hand Wheel	DI(Cap is Optional)

Dimension 

Code No.	Size	DN	L(F4)	L(BS)	D1	D2	D3	H	n-zφd PN10	n-zφd PN16
NRGV-0050	2"	50	150	178	99	125	165	220	4-φ19	4-φ19
NRGV-0065	21/2"	65	170	190	118	145	185	240	4-φ19	4-φ19
NRGV-0080	3"	80	180	203	132	160	200	290	8-φ19	8-φ19
NRGV-0100	4"	100	190	229	156	180	220	330	8-φ19	8-φ19
NRGV-0125	5"	125	200	254	184	210	250	375	8-φ19	8-φ19
NRGV-0150	6"	150	210	267	211	240	285	420	8-φ23	8-φ23
NRGV-0200	8"	200	230	292	266	295	340	500	8-φ23	12-φ23
NRGV-0250	10"	250	250	330	319	355	405	610	12-φ23	12-φ28
NRGV-0300	12"	300	270	356	370	410	460	720	12-φ23	12-φ28
NRGV-0350	14"	350	290	381	429	470	520	920	16-φ23	16-φ28
NRGV-0400	16"	400	310	406	480	525	580	940	16-φ26	16-φ31
NRGV-0450	18"	450	330	432	548	585	640	1150	20-φ26	20-φ31
NRGV-0500	20"	500	350	457	609	650	705	1350	20-φ26	20-φ34
NRGV-0600	24"	600	390	508	720	770	840	1500	20-φ30	20-φ37

 

 

 

 

ABOUT US

 

 

 

 

 

 

 

 

 

 

 

Suzhou walter flow control equipment co.,ltd is a professional manufacturer of water system valves.We can supply OEM for Sluice Valve, gate valve, flange butterfly valve, check valve, strainer, pressure reducing valve, fire hydrant and other kinds of international valves standard and specification.Some products can be offer FM/UL Certificate.Walter focus on consumer experience like offer advice and fluid control solutions to customers,in addition,we can accept custom design and special requirements.

Looking forward to your reply!
 

MORE TRUST,MORE COOPRATION.
WE  ALWAYS WELCOME YOUR INQUIRY AND VISITING!